How can the newly purchased complete dry-mix mortar equipment survive the running-in period?
的使用注意事项，通常是指在设备安装调试好之后，客户在使用中需要注意的事项，我们先来说说正确的开机顺序，空气压缩机、搅拌机、提升机、包装机。 The precautions for the use of complete dry-mixed mortar equipment generally refer to the matters that customers need to pay attention to after the equipment is installed and debugged. Let us first talk about the correct startup sequence, air compressors, mixers, elevators, and packaging machines. .
After the mixer rotates normally, the hoisting material is slowly added, and the load of the motor of the mixer is slowly raised, which will not cause damage to the equipment. The dry running of the machine is a key part of maintaining the dry mortar equipment, and it is to make the bearings and other lubrication parts fully One step of lubrication, the absence of it may lead to bearing slips or damage to bearing oil seals.
，因为是在初期的使用磨合期，一般要求设备每天润滑，需每个润滑点兼具，卧式机以提升机电机一侧轴承，楼式机以搅拌机电机支撑座轴承。 The complete set of dry-mixed mortar equipment has just been commissioned and installed. Because it is in the initial running-in period, it is generally required that the equipment be lubricated every day. It needs to have both lubrication points. Motor support bearings.
Then according to the production capacity requirements of the equipment, such as mixing equipment, the mortar can only stir one ton of mortar, 0.6 grams of light materials such as putty powder, otherwise it will cause problems such as burning motors, broken bearings, broken shafts and other equipment.
When loading the hoist, first load the light weight raw materials such as cement, and then load the weight specific raw materials such as sand. , Then the control switch of each device must be anti-leakage treatment, and non-professionals are strictly prohibited from testing and maintaining the device, as well as debugging.