How to maintain the electrical equipment of dry-mixed mortar equipment manufacturers ?
设备应安装在固体的场地中，安装后检查搅拌机是否固定牢靠，检查干混砂浆生产设备绞龙的转动是否正常，保护装置应坚实可靠操作灵活，变速器、工作装置、制动器等应快速可靠，确保正常工作。 Manufacturers of dry-mixed mortar equipment should be installed in a solid site. After installation, check whether the mixer is firmly fixed. Check whether the auger of the dry-mixed mortar production equipment rotates normally. The protection device should be solid and reliable. It should be fast and reliable to ensure normal work.
Check whether the dry-mixed mortar production equipment has good electrical equipment, start the dry-mixed mortar production equipment and run it dry, check the rotation direction of the mixing drum or mixing blade, operate the working device of the brake, and confirm that it is normal to work. After checking these places, If something goes wrong, you can solve it yourself.
设备放料速度慢，大量参与物料放不干净，干混砂浆生产设备电机反转，造成内部搅拌螺带推料方向相反，将物料向进料口方向推料，可将电机接电盒打开将任意两根电源输入线调换位置即可。 Dry mixing mortar equipment manufacturers have slow material discharge speeds, and a large number of participating materials cannot be cleaned. The motor of the dry mixing mortar production equipment is reversed, causing the internal mixing ribbon to push the material in the opposite direction. Pushing the material toward the feed port can drive the motor. Open the power box and change any two power input lines.
The elevator is fixed with cement after it enters the ground and cannot be maintained. The elevator hopper is 55 cm wide and 60 cm high. We can dig the embedded pit to 60 cm wide and 70 cm deep when it is buried. Soft objects such as woven bags or newspapers can be pressed tightly.
设备减速机使用什么机油好搅拌机减速机一般在机身上贴有适用机油标号。 Then put the feeding port of the elevator into the buried pit, which solves the problem that the elevator cannot be maintained after the cement has solidified, and also protects the lifting to reduce the damage caused by vibration. The appropriate oil marking is affixed to the body.