Xinxiang dry-mixed mortar equipment manufacturers share correct and reasonable ingredients
给大家讲述正确配料的方法，希望对大家有所帮助！ Some users do not know how to add the dry mortar after buying it back. The incorrect feeding method may affect normal use. Today, the Xinxiang dry mortar equipment manufacturer will tell you the correct ingredients, and I hope to help everyone!
考虑到悬浮量，精加料装置提前逐渐减速停止提前量调试时确定。 Start the feeding device first, stop feeding when the metering batching bin is near to the value quickly, open the fine feeding device to continue feeding, and gradually approach the batching amount. Xinxiang dry mixing mortar equipment manufacturers consider the suspension amount, and the fine feeding device gradually slows down in advance to stop the advance amount. OK during commissioning.
At the same time, immediately close the shut-off valve to intercept the possible collapse of the material. The meter can track the feeding amount at any time. After the fine feeding device stops, the meter will display for 10 seconds after it stops. The meter will display the stable value of the first material.
Immediately after the second material starts to quickly feed to the metering and batching bin, repeat the above operation to know that all the feeding is complete. According to personal circumstances, you can also add the material by hand. The metering and batching bin is completely filled. The material in the metering batching bin is discharged into the mixer through soft connections and pipes.
仪表回零，斜口密封阀门自动关闭，进入下一个配料循环，如果物料不能及时排空，斜口密封阀门则不能自动关闭，就不能进入下一个程序，此时喷气嘴自动向斜下方喷气将料排出。 After the material is evacuated, the meter of Xinxiang dry-mixed mortar equipment manufacturer returns to zero. The oblique-port sealed valve automatically closes and enters the next batching cycle. If the material cannot be emptied in time, the oblique-port sealed valve cannot be closed automatically. At this time, the air jet nozzle automatically ejects the air obliquely downward to discharge the material.