Dry mortar equipment manufacturers tell us what role storage tanks play
采用双轴桨叶高效混合机，不破坏物料的原始状态。 The mortar equipment production line is mainly composed of a hoist, pre-mixing silo, small silo, mixer, finished product silo, packaging machine, dust collector, electric control cabinet, and gas phase balance system. Dry powder mortar equipment manufacturers use double-shaft paddles for efficient mixing. Machine without destroying the original state of the material.
It ensures the thermal insulation coefficient of the mortar, which will not be reduced due to the shape of the thermal insulation raw materials, and ensures the thermal insulation effect of the product. , Finished product warehouse, packaging scale, bucket elevator, dust collector, fully automatic weighing and weighing warehouse, frame and other components.
生产时根据客户的配方将水泥、粉煤灰、沙子按比例输送到配料秤仓内。 The storage tank is mainly used to store raw materials. The general capacity is sixty cubic meters and the number is three. It is used to store cement, fly ash, sand and other materials. When dry powder mortar equipment manufacturers produce cement, fly ash, The sand is conveyed into the batching scale bin in proportion.
When the batched material is sent to the bucket elevator from the batching warehouse, a small proportion of valuable masterbatches such as cellulose and rubber powder can be metered into the additive hopper through the electronic scale, and the material is lifted to the top of the frame by the bucket elevator. Wait for mixing in the mixing warehouse, and then unload the materials into the double-shaft non-gravity mixer for mixing. The mixed materials enter the finished product warehouse through the pneumatic door, and then are packed by the valve packing machine to complete the operation. This is a simple production line. Compared to another step forward.
特殊工艺的砂浆还需添加少量添加剂如纤维素醚，这些粉粒料都存放在储罐内供生产使用，湿砂先要通过输送机送到筛分机进行筛分，然后通过传输带送往烘干线的三回程烘干机内进行干燥处理。 Dry powder mortar is mainly composed of cement, dry sand, fly ash, thickened powder and other raw materials. Dry powder mortar equipment manufacturers need to add a small amount of additives such as cellulose ether to the special process mortar. These powders and granules are stored in storage tanks for production. In use, wet sand must be sent to a screening machine for screening by a conveyor, and then sent to a three-pass dryer in a drying line via a conveyor belt for drying treatment.