Dry-mixed mortar production equipment manufacturers talk: How to carry out self-test of dry-mixed mortar equipment
Any mechanical equipment needs self-inspection after a period of use. This way we can better grasp its problems, better maintenance, and increase its life. When using dry powder mortar equipment, as to how to carry out self-inspection, as a dry-mix mortar production equipment manufacturer, how to carry out self-inspection, let us learn together!
1. Check whether the appearance of the dry powder mortar equipment meets the requirements. Mainly check the spray paint and appearance of dry powder mortar equipment, because dry powder mortar equipment is a custom-made equipment, which does not exclude customers with special appearance requirements. If the appearance is different from the original plan, communicate with the manufacturer in a timely manner.
2. Check the integrity of the dry mortar equipment. Mainly check whether the supporting equipment of the dry mortar equipment is completely installed, such as whether the electrical control box, weighing device and other equipment are installed in place. It is important to check that the original parts of the electric control box are complete to avoid problems during the test machine.
3. Testing machine with material. It is very important that the dry powder mortar equipment needs to be tested after the installation. The belt test machine can check the operation of the equipment on the one hand, and check whether the equipment is running normally on the other. In the process of loading the test machine, you need to pay attention that the test machine cannot add a large amount of material at one time to avoid the burnout of the motor. It should be added gradually and gradually, which can also be regarded as a kind of running-in to the equipment.
The above is a question about how dry powder mortar equipment self-tests shared by dry mix mortar production equipment manufacturers. We hope to help our customers to better maintain dry mix mortar production equipment and extend the life of the equipment.