Analysis of Two Factors of Damage to Impact Sand Making Machine Rotor-- Dry Mortar Production Equipment Manufacturer
During the operation of the sand making machine manufacturer, the life of the dry-mixed mortar production equipment is affected by two factors. After many experiments and summing up, Xinlian got the following two factors.
After the sand making machine is powered on, the power generated by the motor is passed through the bearings and gears to the rotor, and the rotor rotates the broken sand aggregate at a speed of 186 revolutions per minute. Among them, two factors affect the wear status of the rotor.
1. The bearing condition of the rotor bearing The impact load of the impact sander on the bearing depends on the impulse acting on the rotor and the support flexibility of the bearing seat. Increasing the support flexibility of the bearing seat can reduce the effect on the bearing. Therefore, adding a rubber plate of appropriate thickness between the bearing of the sand making machine and the support frame can improve the support flexibility of the bearing seat, improve the bearing force of the bearing, and thereby extend the service life of the rotor.
2. The matching relationship between the rotor and the bearing. The impact of the rotor bearing of the impact sand making machine is mainly the impact load, and the magnitude of the load on the rolling body is different. The rolling body under the combined effect of the impact load has a larger force, and the inner and outer ring raceways It is also here that the force is greater when in contact with the rolling elements.
The above two factors are the analysis of the damage of the rotor of the impact sand maker of dry-mix mortar production equipment manufacturers. If you want the life of the impact sand maker to be long, you must find a reasonable solution to the problem, as long as you find the factors that affect the life. Good solution. Xinlian specializes in the production and development of various types of sand making equipment, and the parts used are also the advantages of the manufacturer. If you need a sand making machine to crush the sand aggregate, you can come to our factory and communicate with our engineers. So that we can provide you with a suitable sand and gravel production line configuration plan.