What to check after installing the newly purchased dry-mixed mortar production equipment
1. Dry-mixed mortar production equipment should be installed in a solid site. After installation, check whether the mixer is firmly fixed.
2. Check whether the auger of the dry-mixed mortar production equipment rotates normally, the safety devices and protection devices should be solid and reliable, and operate flexibly. Transmissions, working devices, brakes, etc. should be fast and reliable to ensure normal work.
3. Check whether the dry-mixed mortar production equipment has good electrical equipment, start the dry-mixed mortar production equipment and run it dry, check the rotation direction of the mixing drum or blade, operate the working device of the brake, and confirm that it can work.
After checking these places, you can solve it yourself if something goes wrong.
Problem 1: The dry mixing mortar production equipment has a slow feeding speed, and a large number of participating materials cannot be cleaned.
Solution: The motor of the dry-mix mortar production equipment is reversed, causing the internal stirring ribbon to push the material in the opposite direction and push the material toward the feed port. The motor connection box can be opened and any two power input lines can be switched.
Question 2: After the hoist is in the ground, it cannot be maintained with cement.
Solution: The elevator hopper is 55 cm wide and 60 cm high. When we dig a buried pit, we can dig the buried pit to a depth of 60 cm and a width of 70 cm. We can compress it with soft objects such as woven bags or newspapers. Then put the feeding port of the hoist into the inside of the pit and solve the problem that the hoist cannot be maintained after the cement has solidified. It also protects the hoist and reduces the damage caused by vibration.
Question 3: What oil is good for the reducer of dry-mixed mortar production equipment?
Solution: The mixer reducer is generally labeled with the applicable oil on the body. As indicated on the reducer, the gear oil has a shelf life. Please pay attention to the gear oil shelf life when it is about to expire.
Question 4: How to clean up the debris inside the dry mixing mortar production equipment for the first time?
Solution: about 200 kg of fine sand can be stirred inside the mixer for 30-60 minutes. Until the inner wall of the mixing barrel becomes smooth and free of scum, you can open the discharge port and the bottom cleaning door to let the sand out and pat.
The above is some help for new users of dry-mix mortar production equipment manufacturers, hoping to solve your problems.